Royal Beige 24″x24″ Leathered Marble Paver – Refined Outdoor Luxury
The Royal Beige 24″x24″ Leathered Marble Paver offers warm beige tones and a refined leathered texture. Its finish provides slip resistance while preserving natural stone beauty. Therefore, it’s ideal for patios, pool decks, and walkways.
Crafted from premium marble, these 24″x24″ pavers ensure both durability and elegance outdoors. Moreover, the large format reduces grout lines and speeds installation. Consequently, your outdoor spaces achieve a seamless, luxurious look.
Because of their straight, leathered edges, these pavers soften glare and add a tactile feel. Their neutral hues complement modern or classic design schemes. Furthermore, they resist weathering and maintain their charm over time.
Key Features
- Material: Premium natural marble
- Color: Warm beige with subtle tonal variation
- Finish: Leathered for texture and slip resistance
- Size: 24″x24″ (nominal)
- Edge: Leathered straight edge
- Applications: Patios, pool decks, walkways, and courtyards
Ultimately, the Royal Beige Leathered Marble Paver brings lasting beauty and reliable performance to every outdoor project.
Installation Guide – Royal Beige 24″x24″ Leather Finish Marble Paver
Important Advisory
This guide covers only the paver covering phase. Ensure sub-base and bedding preparation are completed by qualified professionals before installation.
Step 1: Dry Layout & Pattern Planning
- Dry-lay pavers on the prepared bedding surface to assess color and leathered texture variation.
- Arrange pavers in a running bond, ashlar, or modular pattern to minimize visible joints and balance tones.
- Use chalk lines or a laser level to mark reference lines for straight, consistent alignment.
Step 2: Paver Placement
- Set each 24″x24″ paver gently onto the prepared bedding layer.
- Maintain consistent joint spacing of 1/8″–1/4″.
- Tap each paver lightly with a rubber mallet to ensure full seating and level surface.
- Check frequently with a level to prevent lippage, especially on large-format pieces.
Step 3: Cutting & Edge Finishing
- Use a wet saw with a diamond blade rated for marble to make precise cuts.
- Support large-format pavers securely during cutting to avoid edge chipping.
- Smooth exposed cut edges with a fine rubbing block to preserve the leathered finish.
Step 4: Joint Treatment
- Fill joints with polymeric sand or a marble-compatible joint filler.
- Compact gently and sweep away all excess material.
- If using polymeric sand, lightly mist to activate binding per manufacturer instructions.
Step 5: Sealing & Maintenance
- Once installation is dry, apply a breathable, penetrating sealer formulated for exterior marble.
- Re-seal every 1–2 years depending on climate and foot traffic.
- Clean with pH-neutral, non-abrasive stone cleaners; avoid acidic products that can etch marble.
Disclaimer
Natural marble exhibits tonal and textural variations which are part of its character and not defects. Always dry-lay and inspect materials before final installation. Professional installation is strongly recommended to ensure durability and optimal appearance.
