Alaska Silver Tumbled 6″x12″ Travertine Paver – Refined Gray with Natural Character
Enhance outdoor spaces with the Alaska Silver Tumbled 6×12 Travertine Paver, a natural stone choice defined by soft silver-gray tones and subtle mineral movement. Its muted color palette creates a clean, sophisticated foundation while maintaining the warmth and authenticity of natural travertine. The tumbled finish adds a gently textured surface that feels comfortable underfoot and visually timeless.
The versatile 6″x12″ format allows for creative and flexible installations. From classic running bond layouts to herringbone walkways and detailed accent borders, this size adapts easily to both contemporary and traditional designs. The softly rounded edges introduce an aged, organic appearance that blends seamlessly with wood, concrete, metal, and surrounding landscape elements.
Key Features
- Material: Natural Alaska Silver travertine
- Color: Silver-gray with light beige and natural variation
- Finish: Tumbled surface for a weathered, slip-friendly texture
- Size: 6″ x 12″ (nominal)
- Edge: Softly eased, antiqued profile
- Patterns: Running bond, herringbone, straight lay, and decorative borders
- Applications: Patios, garden paths, pool decks, courtyards, and entryways
Select Alaska Silver when your project calls for understated elegance and long-lasting durability. With proper sealing and routine maintenance, this travertine paver will retain its natural beauty and performance for years in both residential and light commercial outdoor settings.
Installation Guide – Alaska Silver Tumbled 6″x12″ Travertine Paver
Important Notice
This installation guide focuses solely on the paver placement stage. Proper sub-base preparation, drainage, and bedding installation must be completed in advance by experienced professionals to ensure long-term performance.
Step 1: Layout Planning & Dry Fitting
- Dry-lay the pavers prior to installation to review natural color variation, veining, and tumbled edge differences.
- Select a layout pattern that complements the space—running bond, herringbone, and basketweave are especially well-suited for the 6″x12″ format.
- Establish straight reference lines using chalk lines or a laser level to maintain accurate alignment throughout the installation.
Step 2: Setting the Pavers
- Carefully place each 6″x12″ paver onto the prepared bedding layer, following the planned layout.
- Maintain consistent joint spacing between 1/8″ and 1/4″ for proper movement and joint filling.
- Lightly tap pavers into position using a rubber mallet to ensure full contact with the bedding layer.
- Regularly check surface level and edge alignment, adjusting the bedding as needed to prevent lippage.
Step 3: Cutting & Edge Treatment
- Use a wet saw equipped with a diamond blade designed for natural stone to achieve clean, precise cuts.
- Support smaller pavers during cutting to minimize vibration and edge chipping.
- Soften exposed cut edges with a rubbing stone to visually match the tumbled finish.
Step 4: Joint Filling
- Fill joints using polymeric sand or a jointing material approved for exterior travertine installations.
- Compact the surface gently and sweep away excess material from the stone surface.
- If polymeric sand is used, lightly mist with water according to the manufacturer’s activation guidelines.
Step 5: Sealing & Ongoing Care
- Once the installation is fully dry, apply a penetrating, breathable sealer formulated for outdoor travertine.
- Reapply sealer every 12–24 months depending on climate, exposure, and foot traffic.
- Routine cleaning should be done using pH-neutral stone cleaners; avoid acidic or abrasive products.
Disclaimer
Alaska Silver travertine is a natural stone product and may exhibit variations in color, veining, texture, and surface pits. These characteristics are inherent to the material and are not considered defects. Always inspect and dry-lay materials prior to final installation. Professional installation is strongly recommended.
