Front view of Ruby Green marble pixel honed mosaic—grid of small square tiles on mesh, varied green tones with subtle white veining.

Single sheet, front view—Ruby Green marble pixel mosaic with evenly spaced small squares on mesh backing.

Three-quarter perspective of the Ruby Green marble pixel mosaic, showing tile thickness and honed edges.

Close-up across the sheet highlighting mixed green shades and organic vein patterns on the square tiles.

Angled close-up showing the honed finish and lightly chiseled edges; color variation from sage to deep green with natural veining.

Ruby Green Marble Mosaic Tile – Pixel Honed

The Ruby Green Pixel Honed Marble Mosaic Tile combines deep green marble with a soft matte finish, perfect for backsplashes, bathrooms, showers, and feature walls.

$19.49 / Piece

Item Code: MM130-24150 Category Mosaics

540 Pieces in stock

Est. Coverage: 0.86 sq. ft. per piece | 8.60 sq. ft. per box | 464 sq. ft. per crate | Request Info

Note on Samples:
Sample pieces are small cut sizes, approximately 3" x 3" to 8" x 8", and intended for color and finish reference only.
If you need a full-size sample, please contact us.

Request Custom Pricing for Large Orders

Planning a large project? Orders over 500 sq. ft., full crates, or commercial applications may qualify for exclusive volume pricing. Reach out today and let us provide a custom quote tailored to your needs.

Request Volume Quote

Volume pricing available for qualified bulk orders.
We offer custom sizes, finishes, and crate-based shipments.

The Ruby Green Pixel Honed Marble Mosaic Tile adds a unique blend of elegance and bold design to any space. With its soft honed finish, this tile highlights rich green tones and natural veining while providing a modern matte look.

This mosaic tile works well in both residential and commercial settings. Use it to create striking surfaces for:

Kitchen backsplashes with a modern edge
Bathroom walls and shower floors for a spa-like retreat
Accent walls that stand out in living rooms or offices
Fireplace surrounds with timeless character

The pixel format ensures easy installation and smooth alignment, while its honed finish reduces glare and enhances the natural beauty of marble. Designers often choose it for its versatility—whether for subtle detailing or large feature areas.

Crafted from premium marble, the Ruby Green Pixel Mosaic Tile combines durability with style. It resists daily wear and continues to look refined, making it a long-lasting choice for interiors that demand sophistication.

Weight	4 lbs
Dimensions	10.4 × 12 × 0.40 in
Color	Green
Finish	Honed Finish
Thickness	3/8
Size (inches)	10.40 x 12
Design	Pixel
Material	Marble
Usage Area	Backsplash, Commercial Interior Walls, Outdoor Walls, Residential Interior Walls, Shower Walls

Installation Guide – Ruby Green Pixel Honed Marble Mosaic Tile

Material Notes

Natural green marble in a honed (matte) finish.
Small “pixel” chips mesh-mounted on ~12″x12″ sheets (some lots may be paper-faced).
Green/serpentine marbles can be moisture-sensitive (possible curling/warping). See Adhesive section for setting options.
Suitable for walls, backsplashes, shower floors/walls, and light-traffic residential floors. Numerous grout joints improve traction.

Step 1: Surface Preparation

Substrate must be clean, dry, rigid, and very flat (≤1/8″ in 10′). Skim/patch as needed.
Approved substrates: cement backer board, cured concrete, or mortar bed meeting ANSI standards.
Wet areas: install ANSI A118.10 waterproofing; shower floors require ¼” per foot slope to drain.

Step 2: Dry Layout & Sheet Planning

Blend sheets from multiple boxes to distribute natural shade variation.
Snap level reference lines; confirm sheet orientation (arrows on the back when present).
Trim mesh edges and stagger sheet seams so the sheet grid disappears; pre-fit around outlets/edges.

Step 3: Adhesive Selection (Moisture-Sensitive Marble)

Best practice for serpentine/green marbles: use a 100% solids epoxy mortar (ANSI A118.3) to prevent curling/warping.
Alternative (jobsite mockup required): a rapid-setting, low-water, polymer-modified thin-set (ANSI A118.15) specifically labeled for moisture-sensitive stone.
Avoid premixed mastic in all applications and avoid prolonged water exposure during install/clean-up.

Step 4: Trowel & Application

Use a 3/16″ V-notch (or 1/4″x3/16″ V-notch) on flat substrates.
Key in with the flat side, comb in one direction, then lightly flatten ridges so they don’t telegraph through the small chips.
Work in areas you can cover within 10–15 minutes to avoid skinning (shorter with rapid-set or epoxy).

Step 5: Setting the Mosaics

Place sheets to your layout lines; press in with a rubber grout float or beating block for full contact and a flat plane.
Lift/adjust immediately if lippage occurs; back-butter individual chips if needed.
Clean squeeze-through adhesive from joints and faces promptly with a barely damp sponge/microfiber. Minimize water.
If paper-faced: set paper out, beat in, lightly wet paper after initial grab (≈10–20 min), remove paper, true up joints.

Step 6: Cutting & Detailing

Use a wet saw with a continuous-rim diamond blade for marble; tape the cut line to reduce chip-out.
For tiny trims, use mosaic nippers sparingly; dress exposed cuts with a rubbing stone.
Finish exposed edges with stone trim, metal profiles, or matching moldings.

Step 7: Grouting (Honed, Dark/Green Marble)

Allow adhesive to cure (typically 24 hrs for cementitious; follow label for epoxy/rapid-set).
For joints ≤1/8″, use unsanded grout; for slightly wider joints, choose a fine-aggregate, marble-safe grout (test first).
On dark honed marble, use a grout release or pre-seal to limit pigment uptake/haze; always make a mockup.
Pack diagonally with a rubber float; clean with minimal water. Do not use acidic haze removers.

Step 8: Sealing

After grout cures (≈72 hours), apply a penetrating, breathable sealer approved for marble and grout.
Re-seal periodically based on exposure (e.g., every 1–2 years in wet zones).

Maintenance

Clean with pH-neutral, non-abrasive stone cleaners only; avoid acids, vinegar, bleach, or abrasive pads.
In showers, squeegee/wipe dry after use to limit mineral deposits; use marble-safe scale removers if needed.

Movement Joints

Honor structural joints and provide soft joints per TCNA EJ171 at perimeters and changes of plane.
Use 100% silicone (stone-safe) in corners and where tile meets dissimilar materials.

Important Notes & Disclaimer

Perform a moisture sensitivity check (24-hr damp piece test). If curling/warping occurs, set with epoxy mortar and consider epoxy grout.
Natural marble varies in tone/veining; blend sheets before setting. Expect slight size/thickness tolerances common to mosaics.
Stonemarket USA is not responsible for substrate issues or improper installation. Professional installation is recommended.