Installation Guide – Pietra D’Assisi Noce 12×24 Porcelain Tile Natural Pressed
Important Advisory
Always follow the Happy Floors installation recommendations, applicable local building codes, and recognized industry standards such as ANSI A108/A118 and TCNA guidelines. Confirm that the substrate, setting materials, waterproofing, drainage, movement accommodation, and site conditions are appropriate for the selected application.
Step 1: Layout & Planning
- Verify that the substrate is clean, dry, structurally sound, and suitably flat for the selected tile installation.
- Plan the layout before setting tile, balancing the pattern and minimizing narrow perimeter cuts.
- Inspect material before installation and blend tiles from multiple boxes to distribute normal shade and pattern variation.
- Establish appropriate joints based on the tile format, layout, substrate, and industry guidance. Provide movement joints where required by the installation environment.
Step 2: Tile Installation
- Use a setting material approved for porcelain tile and appropriate for the substrate and installation location.
- Apply mortar according to the setting-material manufacturer’s instructions, using coverage and application practices suitable for the tile and site conditions.
- Set tiles with consistent alignment and joint spacing, checking regularly for lippage and bond.
- Allow the setting material to cure according to its manufacturer’s instructions before grouting or permitting traffic.
Step 3: Cutting
- Use a wet saw or other suitable cutting equipment with a diamond blade intended for porcelain tile.
- Measure and mark cuts carefully, supporting the tile during cutting to help reduce chipping.
- Ease or finish exposed cut edges where needed at transitions and perimeter locations.
Step 4: Joint Filling
- Select grout compatible with porcelain tile, the planned joint width, and the application environment.
- Pack joints fully and clean the surface in accordance with the grout manufacturer’s instructions.
- Use flexible sealant rather than grout at movement joints, changes of plane, and other locations requiring sealant.
- Protect the installation from traffic until the grout and setting materials have cured as directed.
Step 5: Cleaning & Maintenance
- Remove installation residue using products approved for porcelain tile and follow the cleaner manufacturer’s instructions.
- Clean routinely with a suitable pH-neutral tile cleaner and avoid harsh abrasives or products that may damage the surface or grout.
- Follow the grout manufacturer’s recommendations for ongoing care and sealing where applicable.
Disclaimer
Installation should be performed by qualified tile professionals. Confirm product condition, shade variation, dimensions, application suitability, and site requirements before installation. Stone Market USA is not responsible for problems caused by improper installation, handling, substrate conditions, or failure to follow manufacturer instructions.
