Nextone Dark 12×24 Porcelain Tile Natural Rectified
Sophisticated and versatile, the Nextone Dark 12×24 porcelain tile brings a rich, deep tone with a soft natural (matte) surface. The clean 12×24 format helps minimize grout lines for a smooth, modern look across walls or floors, while precise rectified edges support tight, consistent joints.
Crafted in durable porcelain with a PEI 5 wear rating, it’s built for high-traffic interiors and everyday ease of maintenance. Frost resistance expands design possibilities to exterior facades in freeze–thaw climates. Box coverage is 15.5 sq. ft. (8 pieces), making layout planning straightforward for projects large and small.
Use it on its own for bold simplicity or coordinate with complementary materials to create layered, architectural detail. The understated matte finish pairs naturally with both warm and cool palettes.
Features
- Porcelain body for durability and easy care
- Color: Dark
- Finish: Natural (matte) surface
- Edge: Rectified for precise, narrow grout joints
- Size: 12×24 tile
- PEI 5 wear rating for heavy-duty residential and commercial floors
- Frost resistant for freeze–thaw exterior wall applications
- Coverage: 15.5 sq. ft. per box | 8 pieces per box | ~1.9375 sq. ft. per piece
Recommended Applications
- Residential interior floors
- Residential interior walls
- Commercial interior floors
- Commercial interior walls
- Backsplashes
- Fireplace surrounds
- Exterior walls/facades (freeze–thaw)
Installation Guide – Nextone Dark 12×24 Porcelain Tile Natural Rectified
Important Advisory
Always follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (e.g., ANSI A108/A118 and TCNA guidelines). Ensure proper substrate preparation, movement accommodation, and waterproofing/drainage where required.
Step 1: Layout & Planning
- Verify the substrate is clean, dry, structurally sound, and flat within tolerances appropriate for 12×24 tile.
- Plan the layout by dry-fitting tiles and centering the design to avoid small perimeter cuts.
- Blend tiles from multiple boxes to distribute any shade or pattern variation evenly.
- Select a joint width appropriate for rectified tile; include movement joints per TCNA EJ171.
Step 2: Tile Installation
- Use a polymer-modified thin-set mortar approved for porcelain tile; follow manufacturer guidance for mixing and open time.
- Key mortar into the substrate, comb with an appropriate notched trowel, and back-butter tiles as needed to improve coverage.
- Set tiles with a slight back-and-forth motion to collapse ridges and achieve proper bond; target coverage consistent with application and location (typically 80–95%).
- Use a leveling system when needed to help minimize lippage with larger-format pieces.
- Allow mortar to cure per manufacturer instructions before grouting or permitting light traffic.
Step 3: Cutting
- Cut with a wet saw using a premium diamond blade suitable for porcelain.
- Mark cuts carefully and support the tile fully to reduce chipping.
- Ease sharp cut edges where they will be exposed.
Step 4: Joint Filling
- Choose a grout suitable for porcelain and the selected joint width; follow manufacturer directions for mixing, application, and cure times.
- Pack joints fully with a rubber float, clean diagonally, and remove haze promptly with clean water.
- Use appropriate sealants at movement joints and changes of plane; do not grout these areas.
- Protect the installation from traffic until grout has cured.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH-neutral cleaner approved for porcelain tile; avoid acids or harsh abrasives.
- Use entry mats and felt pads where appropriate to minimize tracked-in grit and scratching.
- Follow grout and mortar manufacturers’ maintenance guidance; reseal cementitious grout if recommended.
Disclaimer
Installation should be performed by qualified professionals. Always confirm actual materials, lot-to-lot variations, and suitability for specific applications before installation. Stone Market USA is not responsible for issues arising from improper installation, handling, or site conditions.
