Bardiglio Polished Pencil Liner – Refined Marble Accent for Elegant Transitions
The Bardiglio Polished Pencil Liner is a sophisticated marble trim designed to add definition and elegance to tile installations. Crafted from natural Bardiglio marble, this pencil liner features a polished finish that enhances the stone’s distinctive gray veining while delivering a smooth, light-reflective surface.
Perfect for wall applications, this trim works beautifully as a finishing edge for backsplashes, shower walls, niches, and decorative borders. Its rounded profile creates seamless transitions between surfaces, while the cool gray tones complement a wide range of marble tiles, mosaics, and stone patterns in both modern and classic interiors.
Product Highlights
- Material: Natural Bardiglio marble
- Finish: Polished for a smooth, glossy appearance
- Color: Soft gray with natural veining variations
- Profile: Rounded pencil liner trim
- Recommended Uses: Backsplashes, shower walls, niches, decorative borders, wall transitions
Design Advantage
The Bardiglio Polished Pencil Liner introduces a clean yet expressive architectural detail where refined finishes matter most. Its subtle curvature softens tile edges, while the polished surface adds depth and visual clarity to the overall layout. Durable and timeless, this marble trim is an excellent choice for residential and light commercial spaces seeking a cohesive, high-end design with a contemporary edge.
Installation Guide – Bardiglio Polished Marble Pencil Liner
Step 1: Surface Preparation – Establish a Clean, Stable Base
- Ensure the installation surface is solid, dry, and free from dust, grease, or debris.
- Complete the installation of surrounding wall tiles or mosaics before placing the pencil liner.
- Use a level and pencil to mark straight reference lines for accurate alignment.
Step 2: Dry Fit – Layout and Planning
- Dry-lay the pencil liners to confirm spacing, alignment, and visual flow.
- Pay close attention to corners and termination points before cutting.
- Cut pieces using a wet saw with a fine diamond blade designed for natural stone.
Step 3: Setting the Liner – Adhesive Application
Recommended Thin-Set Mortars (White):
- Mapei Ultraflex LFT
- Laticrete 254 Platinum
Application Method:
- Apply a thin, even layer of mortar to the back of each pencil liner using a margin trowel.
- Back-butter for full coverage and gently press into place along the guideline.
- For vertical applications, use painter’s tape or spacers to secure pieces during curing.
Step 4: Grouting – Refined Finish for Polished Marble
- Allow the adhesive to cure for a minimum of 24 hours before grouting.
- Use non-sanded grout to prevent scratching the polished marble surface.
- Remove excess grout promptly with a clean, damp sponge.
- After initial set, gently buff the surface with a microfiber cloth to restore shine.
Step 5: Sealing – Long-Term Protection
- Once grout has fully cured (typically 48–72 hours), apply a penetrating sealer suitable for polished marble.
- Reapply sealer periodically based on moisture exposure and maintenance frequency.
Care & Maintenance
- Clean regularly using pH-neutral cleaners formulated for natural stone.
- Avoid acidic or abrasive products such as vinegar, bleach, or harsh chemicals.
- Wipe spills promptly to preserve the polished finish and natural veining.
Important Notice
Bardiglio marble is a natural stone and may exhibit variations in color, veining, and texture. Always inspect and dry-fit materials prior to installation. StoneMarket USA is not responsible for installation errors or natural stone variation once the product has been installed.
