Utah Slate 12×24 Porcelain Tile Natural Pressed
Grounded and contemporary, the Utah Slate 12×24 porcelain tile brings a slate-inspired aesthetic to interiors with a versatile natural (matte) surface. The 12×24 format offers a clean, modern layout on floors or walls, while pressed edges support classic, consistent grout joints.
Engineered in durable porcelain with a PEI 4 wear rating and a wet DCOF of 0.74, this tile balances design flexibility with everyday practicality. Frost resistance expands design possibilities to exterior facades in freeze–thaw climates. Use it as a confident foundation on its own or combine it with coordinating materials to build layered, architectural detail.
Planning is straightforward with dependable box coverage of 14.20 sq. ft. (7 pieces). Blend tiles from multiple boxes before installation to achieve an even distribution of shade and pattern.
Features
- Porcelain body for durability and easy care
- Color: Slate
- Finish: Natural (matte) surface
- Edge: Pressed for classic grout joints
- Size: 12×24 rectangular tile
- PEI 4 wear rating for robust residential use and select light commercial floors
- DCOF: 0.74 (wet)
- Frost resistant for freeze–thaw exterior wall applications
- Coverage: 14.20 sq. ft. per box | 7 pieces per box
Recommended Applications
- Residential interior floors
- Residential interior walls
- Light commercial interior floors
- Commercial interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
- Exterior walls/facades (freeze–thaw)
Installation Guide – Utah Slate 12×24 Porcelain Tile Natural Pressed
Important Advisory
Always follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (e.g., ANSI A108/A118 and TCNA guidelines). Ensure proper substrate preparation, movement accommodation, and waterproofing/drainage where required.
Step 1: Layout & Planning
- Verify the substrate is clean, dry, structurally sound, and flat within industry tolerances for tiles of this size.
- Plan the layout with reference lines and dry-lay a portion to optimize cuts and balance edges.
- Blend tiles from multiple boxes to distribute shade/pattern variation evenly.
- Use spacers appropriate for pressed edges and follow ANSI and grout manufacturer guidance for joint width. Include movement joints per TCNA EJ171.
Step 2: Tile Installation
- Use a polymer‑modified thin‑set mortar approved for porcelain tile and the project conditions (interior/exterior, wall/floor).
- Key mortar into the substrate, then comb with a suitable notched trowel; back‑butter tiles as needed to improve contact.
- Set tiles with a slight sliding motion to collapse ridges and achieve required coverage (minimum 80% interior, up to 95% in wet/exterior areas).
- Use a leveling system if needed to help control lippage, especially with larger formats.
- Protect the installation and allow mortar to cure per manufacturer instructions before grouting or light traffic.
Step 3: Cutting
- Cut with a wet saw and a high‑quality diamond blade rated for porcelain.
- Mark cuts carefully and support the tile fully to reduce chipping.
- Ease sharp cut edges where they will be exposed.
Step 4: Joint Filling
- Select a grout suitable for porcelain and the chosen joint width; follow manufacturer directions for mixing, application, and cure times.
- Pack joints fully with a rubber float, clean diagonally, and remove haze promptly with clean water.
- Use appropriate sealant at movement joints and changes of plane; do not grout these areas.
- Protect the installation from traffic until grout has cured.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH‑neutral cleaner approved for porcelain tile; avoid acids and harsh abrasives.
- Use entry mats and felt pads where appropriate to reduce tracked‑in grit and surface wear.
- Follow grout and mortar manufacturers’ maintenance guidance; reseal cementitious grout if recommended.
Disclaimer
Installation should be performed by qualified professionals. Confirm actual materials, lot‑to‑lot variations, and suitability for specific applications before installation. Stone Market USA is not responsible for issues arising from improper installation, handling, or site conditions.
