Stratus Grigio 12×24 Porcelain Tile Polished Rectified
Elevate contemporary spaces with the Stratus Grigio 12×24 porcelain tile. A refined gray tone and high-polish surface deliver a sleek, light-reflective look, while rectified edges support tight, consistent grout joints for clean lines and modern continuity across floors and walls.
Engineered in durable porcelain at a 3/8 inch (9mm) thickness, Stratus Grigio balances style with everyday practicality. Its frost-resistant body expands design options to exterior facades in freeze–thaw climates, and a PEI 4 wear rating supports robust residential use and selective light-commercial interiors.
Use it as a stand-alone field tile for a minimalist aesthetic or pair with coordinating trims and accents to build layered, architectural detail throughout kitchens, baths, and living areas.
Features
- Material: Porcelain
- Color: Grigio (gray)
- Finish: Polished
- Edge: Rectified for precise, narrow grout joints
- Size: 12×24 rectangular tile
- Thickness: 3/8 inch (9mm)
- PEI Rating: 4
- Frost resistant for freeze–thaw exterior wall applications
- Coverage: 11.62 sq. ft. per box | 6 pieces per box
Recommended Applications
- Residential interior floors
- Residential interior walls
- Light commercial interior floors
- Commercial interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
- Exterior walls/facades (freeze–thaw)
Installation Guide – Stratus Grigio 12×24 Porcelain Tile Polished Rectified
Important Advisory
Always follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (ANSI A108/A118 and TCNA guidelines). Ensure proper substrate preparation, movement accommodation, and waterproofing/drainage where required.
Step 1: Layout & Planning
- Confirm the substrate is clean, dry, structurally sound, and flat within tolerances appropriate for a 12×24 tile.
- Plan the layout by dry-laying tiles, centering the design, and avoiding small perimeter cuts where possible.
- Blend tiles from multiple boxes to evenly distribute any shade variation.
- Use spacers to achieve a consistent joint width suitable for rectified tile; include movement joints per TCNA EJ171.
Step 2: Tile Installation
- Use a polymer-modified thin-set mortar approved for porcelain tile.
- Key mortar into the substrate, then comb with an appropriate notched trowel; back-butter tiles as needed to improve coverage.
- Set tiles with a slight back-and-forth motion to collapse ridges and achieve proper bond; target coverage per industry guidelines for the application.
- Use a leveling system if needed to help minimize lippage on larger modules like 12×24.
- Allow mortar to cure per manufacturer instructions before grouting or light traffic.
Step 3: Cutting
- Cut with a wet saw using a premium diamond blade rated for porcelain.
- Mark cuts carefully, support the tile fully, and feed steadily to reduce chipping.
- Ease sharp cut edges for exposed transitions as needed.
Step 4: Joint Filling
- Select a grout appropriate for porcelain and the chosen joint width; follow manufacturer directions for mixing and cure.
- Pack joints fully with a rubber float, clean diagonally, and remove haze promptly with clean water.
- Use flexible sealants at movement joints and all changes of plane; do not grout these areas.
- Protect the installation from traffic until grout has cured.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH-neutral cleaner suitable for porcelain; avoid harsh abrasives or acids.
- Use entry mats and protective pads to minimize tracked-in grit and potential scratching.
- Follow grout manufacturer maintenance guidance; seal cementitious grout if recommended.
Disclaimer
Installation should be performed by qualified professionals. Confirm actual materials, lot variations, and suitability for the intended application before installation. Stone Market USA is not responsible for issues arising from improper installation, handling, or site conditions.
