Intricate Dorset Beige Crosscut 12×24 Porcelain Tile Matte Rectified
A warm, crosscut stone look in a versatile 12×24 format, Intricate Dorset Beige Crosscut delivers soft movement and natural character with a low-sheen matte surface. Precise rectified edges support clean, consistent grout joints for refined walls and floors.
Engineered in durable porcelain at 9mm (3/8") thickness, this tile balances design versatility with everyday easy care. A DCOF of 0.42 provides dependable traction in typical interior settings. Each box covers 15.5 sq ft (8 pieces), making planning and estimating straightforward.
Use it on its own for a calm, contemporary canvas or mix with complementary textures and accents to build layered detail across kitchens, baths, and living spaces.
Features
- Porcelain body for durability and easy maintenance
- Look/Color: Dorset Beige Crosscut with soft, natural movement
- Finish: Matte (low sheen)
- Edge: Rectified for tight, consistent joints
- Size: 12×24 tile
- Thickness: 9mm (approx. 3/8 inch)
- DCOF: 0.42 (wet)
- Coverage: 15.5 sq ft per box | 8 pieces per box | approx. 1.94 sq ft per piece
Recommended Applications
- Residential interior floors
- Residential interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
- Commercial interior walls
Installation Guide – Intricate Dorset Beige Crosscut 12×24 Porcelain Tile Matte Rectified
Important Advisory
Always follow the tile manufacturer’s instructions, local building codes, and current ANSI A108/A118 and TCNA guidelines. Verify substrate suitability, flatness, and required waterproofing/drainage for wet areas before starting.
Step 1: Layout & Planning
- Confirm the substrate is clean, dry, structurally sound, and flat within tolerances for 12×24 tile.
- Dry-lay to plan layout, balance cuts, and align grout joints; avoid narrow slivers at perimeters.
- Blend tiles from multiple boxes to evenly distribute shade/pattern variation.
- Select appropriate spacers and joint width for rectified tile; provide movement joints per TCNA EJ171.
Step 2: Tile Installation
- Use a polymer‑modified thin-set mortar approved for porcelain tile.
- Key mortar into the substrate, then comb with an appropriate notched trowel; back‑butter tiles as needed to improve coverage.
- Set tiles with a slight perpendicular motion to collapse ridges; achieve coverage per industry standards (typically 80–95% based on area/use).
- Use a tile leveling system where needed to help minimize lippage with 12×24 formats.
- Allow mortar to cure per manufacturer direction before grouting or light traffic.
Step 3: Cutting
- Cut with a wet saw using a premium diamond blade suitable for porcelain.
- Mark and support cuts carefully to reduce chipping and breakage.
- Ease sharp cut edges where they will be exposed.
Step 4: Joint Filling
- Choose a grout suitable for porcelain and the selected joint width; follow manufacturer mixing and cure instructions.
- Pack joints fully with a rubber float, clean diagonally, and remove haze promptly with clean water.
- Use appropriate sealant at movement joints and changes of plane; do not grout these areas.
- Protect the installation from traffic until grout has cured.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH‑neutral cleaner made for porcelain tile; avoid harsh acids or abrasives.
- Use entry mats and felt pads to reduce tracked-in grit and potential scratching.
- Follow grout manufacturer maintenance guidance; seal cementitious grout if recommended.
Disclaimer
Installation should be performed by qualified professionals. Always confirm actual materials, shade variation, and suitability for the intended application before installation. Stone Market USA is not responsible for issues from improper installation, handling, or site conditions.
