Dolomite Beige 12×24 Porcelain Tile Polished Rectified
Warm and refined, Dolomite Beige brings a softly veined beige tone to contemporary and classic spaces alike. The polished surface reflects light for a clean, elegant look, while the 12×24 rectangular format helps minimize grout lines for a smooth, modern layout.
Made from durable porcelain with precise rectified edges, this tile supports tight, consistent joints and easy maintenance. A PEI 4 wear rating suits everyday residential use and select light commercial interiors, and frost resistance opens design options for exterior facades in freeze–thaw climates.
Use Dolomite Beige on its own for a seamless field or pair it with coordinating trims to frame walls, backsplashes, and architectural details.
Features
- Porcelain body for durability and easy care
- Color: Beige
- Finish: Polished surface
- Edge: Rectified for precise, narrow grout joints
- Size: 12×24 rectangular format
- Thickness: 10mm (3/8")
- PEI 4 wear rating
- Frost resistant for freeze–thaw exterior wall applications
- Coverage: 11.62 sq. ft. per box | 6 pieces per box
Recommended Applications
- Residential interior floors
- Residential interior walls
- Light commercial interior floors
- Commercial interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
- Exterior walls/facades (freeze–thaw)
Installation Guide – Dolomite Beige 12×24 Porcelain Tile Polished Rectified
Important Advisory
Always follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (ANSI A108/A118 and TCNA guidelines). Verify suitability for the intended use, and ensure proper substrate preparation, movement accommodation, and waterproofing/drainage where required.
Step 1: Layout & Planning
- Confirm the substrate is clean, dry, structurally sound, and flat within tolerances appropriate for 12×24 tile.
- Plan the layout by dry-laying tiles to balance cuts and avoid narrow slivers at perimeters.
- Blend material from multiple boxes to evenly distribute shade and pattern variation.
- Use spacers and joint widths appropriate for rectified tile; incorporate movement joints per TCNA EJ171.
Step 2: Tile Installation
- Use a polymer-modified thin-set mortar approved for porcelain and the tile’s size.
- Key mortar into the substrate, comb with an appropriate notched trowel, and back-butter tiles as needed to improve coverage.
- Set tiles with a slight back-and-forth motion to collapse ridges and achieve proper bond; meet or exceed coverage requirements for the application and location.
- Use a leveling system when needed to help minimize lippage with larger formats.
- Allow the mortar to cure per manufacturer instructions before grouting or light traffic.
Step 3: Cutting
- Cut with a wet saw and a premium diamond blade suitable for porcelain.
- Mark cuts carefully and support the tile fully during cutting to reduce chipping.
- Ease sharp cut edges where they will be exposed.
Step 4: Joint Filling
- Select a grout suitable for porcelain and the chosen joint width; follow manufacturer directions for mixing and application.
- Pack joints fully with a rubber float, clean diagonally, and remove haze promptly with clean water.
- Use appropriate sealants at movement joints and changes of plane; do not grout these areas.
- Protect the installation from traffic until grout has cured as directed.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH-neutral cleaner designed for porcelain tile; avoid harsh acids or abrasives.
- Use entry mats and furniture pads to reduce abrasion from grit and heavy furnishings.
- Follow grout manufacturer guidance for maintenance; seal cementitious grout if recommended.
Disclaimer
Installation should be performed by qualified professionals. Confirm actual materials, lot-to-lot variations, and suitability for specific applications before installation. Stone Market USA is not responsible for issues arising from improper installation, handling, or site conditions.
