Intricate Dorset Beige Veincut 12×24 Porcelain Tile Matte Rectified
Warm and refined, the Intricate Dorset Beige Veincut 12×24 porcelain tile showcases a linear veining pattern inspired by vein‑cut stone, rendered in a versatile beige palette. The matte surface softens reflections, while precise rectified edges support tight, consistent grout joints for a crisp, contemporary layout.
Crafted in durable porcelain at 3/8 inch (9mm) thickness, this tile balances style with everyday practicality across kitchens, baths, and living spaces. The 12×24 format helps reduce grout lines for a cleaner look. Box coverage is 15.5 sq. ft. (8 pieces), helping streamline takeoffs and ordering.
Use it as a seamless field or combine with complementary materials to create visual depth. The understated matte finish pairs easily with a range of cabinetry, stones, and metals for timeless coordination.
Features
- Porcelain body for durability and easy care
- Color/Design: Dorset Beige Veincut with linear stone‑inspired movement
- Finish: Matte, low sheen
- Edge: Rectified for clean, narrow grout joints
- Size: 12×24 rectangular format
- Thickness: 3/8 inch (approx. 9mm)
- DCOF: 0.42 (wet)
- Coverage: 15.5 sq. ft. per box | 8 pieces per box | approx. 1.9375 sq. ft. per tile
Recommended Applications
- Residential interior floors
- Residential interior walls
- Commercial interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
Installation Guide – Intricate Dorset Beige Veincut 12×24 Porcelain Tile Matte Rectified
Important Advisory
Follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (ANSI A108/A118 and TCNA). Confirm substrate suitability, movement accommodation, and waterproofing/drainage where required for the application.
Step 1: Layout & Planning
- Verify the substrate is clean, dry, structurally sound, and flat within tolerances appropriate for 12×24 tile.
- Dry‑lay to confirm layout, balance cuts, and align veining direction; center the field to avoid slivers at perimeters.
- Blend tiles from multiple boxes to distribute shade and vein variation evenly.
- Plan grout joint width appropriate for rectified tile, and provide movement joints per TCNA EJ171.
Step 2: Tile Installation
- Use a polymer‑modified thin‑set mortar approved for porcelain and for the substrate conditions.
- Key mortar into the substrate, then comb with an appropriate notched trowel; back‑butter tiles as needed to improve contact.
- Set tiles with a slight slide to collapse ridges and achieve required coverage (typically 80–95% depending on area and exposure).
- Use a leveling system when helpful to minimize lippage with 12×24 formats.
- Allow mortar to cure per manufacturer instructions before grouting or opening to light traffic.
Step 3: Cutting
- Cut with a wet saw using a premium diamond blade rated for porcelain.
- Support the tile fully and mark cuts carefully to reduce chipping.
- Ease sharp cut edges where exposed for a refined finish.
Step 4: Joint Filling
- Select a grout suitable for porcelain and the planned joint width; follow manufacturer mixing and cure guidance.
- Pack joints firmly with a rubber float, then clean diagonally and remove haze promptly with clean water.
- Use appropriate sealant at movement joints and all changes of plane; do not grout these areas.
- Protect the installation from traffic until grout has cured.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH‑neutral cleaner approved for porcelain; avoid acids and harsh abrasives.
- Use entry mats and protective pads to limit tracked‑in grit and scratching.
- Follow grout manufacturer maintenance guidance; seal cement‑based grout if recommended.
Disclaimer
Installation should be performed by qualified professionals. Always confirm actual materials, lot variations, and suitability for specific applications prior to installation. Stone Market USA is not responsible for issues arising from improper installation, product handling, or site conditions.
