Athena Blanc (Rodas White) 12×24 Porcelain Tile Polished Rectified
Refined and luminous, Athena Blanc (Rodas White) brings a crisp white aesthetic to modern interiors. The polished surface enhances light and reflection, while precise rectified edges support clean lines and tight, consistent joints for an elevated finish.
Designed in durable porcelain with a versatile 12×24 format, this tile balances style with everyday practicality. A PEI 4 wear rating supports active residential floors, and frost resistance expands design options to exterior wall facades in freeze–thaw climates. Pair it with coordinating materials and trims to create cohesive spaces across kitchens, baths, and living areas.
At 3/8" (9.5mm) thick, Athena offers reliable dimensional stability for professional installations. Use it to achieve seamless walls or refined floors in dry areas where a high-gloss look is desired.
Features
- Material: Porcelain
- Color: Blanc (Rodas White)
- Finish: Polished
- Edge: Rectified for precise, narrow grout joints
- Size: 12×24 tile
- Thickness: 3/8" (9.5mm)
- PEI 4 wear rating for robust residential traffic
- Frost resistant for freeze–thaw exterior wall applications
- Box coverage: 11.62 sq. ft. | Approx. 1.94 sq. ft. per piece | 6 pieces per box
Recommended Applications
- Residential interior floors (dry areas)
- Residential interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
- Commercial interior walls
- Light commercial interior floors (dry areas)
- Exterior walls/facades (freeze–thaw)
Installation Guide – Athena Blanc (Rodas White) 12×24 Porcelain Tile Polished Rectified
Important Advisory
Always follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (ANSI A108/A118 and TCNA). Ensure proper substrate preparation, movement accommodation, and waterproofing/drainage where required.
Step 1: Layout & Planning
- Verify the substrate is clean, dry, structurally sound, and flat within tolerances suitable for 12×24 porcelain tile.
- Plan the layout with dry-lays to balance cuts and avoid narrow slivers at perimeters or focal areas.
- Blend tiles from multiple boxes to evenly distribute any shade or pattern variation.
- Use spacers consistent with rectified tile and include movement joints per TCNA EJ171 at appropriate intervals and changes of plane.
Step 2: Tile Installation
- Use a polymer-modified thin-set mortar approved for porcelain tile and the project’s conditions.
- Key mortar into the substrate, then comb in straight lines with an appropriate notched trowel; back-butter tiles as needed to improve bond.
- Set tiles with a slight sliding motion to collapse ridges and achieve adequate coverage (typically 80–95% based on area and exposure).
- Employ a tile leveling system when needed to help minimize lippage with rectangular formats.
- Allow mortar to cure per manufacturer instructions before grouting or exposing to traffic.
Step 3: Cutting
- Cut with a wet saw using a premium diamond blade rated for porcelain.
- Support tiles fully during cutting and mark cuts carefully to minimize chipping.
- Ease sharp cut edges where they will be exposed for a safer, finished feel.
Step 4: Joint Filling
- Select a grout suitable for porcelain and the chosen joint width; confirm compatibility with polished surfaces per grout manufacturer guidance.
- Pack joints completely with a rubber float, clean diagonally, and remove haze promptly with clean water.
- Use appropriate sealant at movement joints and changes of plane—do not grout these areas.
- Protect the installation from traffic until grout has cured as directed.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH-neutral cleaner approved for porcelain; avoid acids or harsh abrasives.
- Use entry mats and felt pads to limit tracked-in grit and reduce surface wear.
- Follow grout and setting material manufacturers’ maintenance guidance; seal cementitious grout if recommended.
Disclaimer
Installation should be performed by qualified professionals. Confirm actual materials, lot characteristics, and suitability for specific applications before installation. Stone Market USA is not responsible for issues arising from improper installation, handling, or site conditions.
