Limestone Baseboard Trim Piece 4″x12″ Honed – Elegant Beige Accent
Enhance the architectural continuity of your interior spaces with the 4″x12″ Limestone Baseboard Trim. Crafted from premium beige limestone, this honed trim piece delivers a clean, subtle finish that elegantly grounds any wall-to-floor transition. Its smooth surface and natural warmth bring an inviting, organic aesthetic to both traditional and modern interiors.
Perfect for pairing with limestone floor or wall tiles, this baseboard molding is designed to protect walls from scuffs while providing a refined, finished look. The honed finish adds a soft matte texture that complements the stone’s natural character without overpowering surrounding elements.
Key Features
- Material: Natural Beige Limestone
- Finish: Honed – smooth, matte texture
- Color: Warm beige tone with organic movement
- Size: 4″ x 12″ (10.2 cm x 30.5 cm)
- Application: Baseboard trim for residential or commercial interiors
- Style: Straight edge profile for clean architectural lines
Whether you are finishing a kitchen, bathroom, or living space, this limestone baseboard trim provides durability, elegance, and seamless style integration with matching stone surfaces.
Installation Guide – Limestone Baseboard Trim Piece (4″x12″ Honed)
Step 1: Surface Preparation – Begin with a Clean Base
- Ensure that the floor and wall surfaces are clean, dry, and structurally sound.
- Complete the installation of the adjacent floor tile before setting the baseboard trim.
- Remove any dust, adhesive residue, or paint flakes along the lower wall section.
Step 2: Dry Layout – Plan for Fit and Flow
- Dry-lay trim pieces to check for color consistency and natural variation.
- Mark a straight horizontal guide line on the wall approximately 4 inches above the floor.
- Trim pieces using a wet saw with a diamond blade to achieve clean, accurate cuts.
Step 3: Adhesive Application – Set with Precision
Recommended Adhesives:
- Laticrete 254 Platinum (white)
- Mapei Ultraflex LFT White or equivalent thin-set mortar
Instructions:
- Apply a layer of thin-set mortar to the back of each trim piece using a margin trowel.
- Back-butter for full contact and press each piece firmly into place along the guideline.
- Use painter’s tape to hold vertical or unsupported pieces while curing (24 hours recommended).
Step 4: Grouting – Complete the Seam
- Allow adhesive to cure fully before grouting (minimum 24 hours).
- Use unsanded grout for narrow joints to avoid scratching the honed surface.
- Wipe excess grout with a damp sponge and buff after 30–45 minutes using a soft cloth.
Step 5: Sealing – Protect Your Limestone
- After grout cures (typically 72 hours), apply a penetrating sealer compatible with honed limestone.
- Reapply sealer periodically depending on traffic and exposure to moisture.
Maintenance Tips
- Clean regularly using a pH-neutral stone cleaner.
- Avoid acidic, bleach-based, or abrasive cleaners that may etch or discolor the surface.
- Dust or wipe gently to maintain the integrity of the honed finish.
Important Note
Limestone is a natural product, and variation in tone and texture is expected. Always inspect and dry-lay pieces before installation. Stonemarket USA is not responsible for installation errors or natural material variations.
