1×2 Inch Herringbone – Royal Beige Polished Mosaic Tile

Maximize the Performance of Your Royal Beige Herringbone Polished Marble Mosaic Tile (11.5″ x 11.5″)

Achieve a flawless and long-lasting installation by following these essential steps for preparing, installing, and finishing your Royal Beige Herringbone Polished Marble Mosaic Tile (11.5″ x 11.5″). Proper installation enhances durability, stability, and aesthetic appeal, while maintaining the elegant herringbone pattern and polished finish of this premium tile.

Step 1: Surface Preparation

A well-prepared surface is critical for a successful tile installation. Ensure the substrate is:</p>

✔ Clean, dry, and free from dust, grease, soap scum, and debris.
✔ Structurally sound and level, with no cracks or loose sections.
✔ Properly waterproofed, especially in moisture-prone areas like bathrooms, kitchens, and showers.
✔ Cleared of any moldings or obstructions that may interfere with tile placement.
✔ If necessary, apply a self-leveling compound to create an even surface before installation.

Step 2: Layout Planning

✔ Measure the installation area and mark the center points of all four walls.
✔ Snap chalk lines between opposite walls to establish a precise grid for tile alignment.
✔ Dry-lay a row of tiles along the center lines in both directions to ensure even distribution and a balanced pattern.
✔ Adjust the center line if edge cuts are too small.
✔ Use tile spacers (1.5mm – 3mm) to maintain uniform grout joints.
✔ Dry-lay multiple sheets to ensure a seamless herringbone pattern before installation.

Step 3: Selecting & Applying Adhesive

Choosing the right adhesive is crucial for a strong bond. We recommend using a high-quality white thin-set mortar, such as:

• Mapei
• Laticrete
• Ardex

✔ Application:

1. Mix only the amount of mortar that can be used within 30 minutes.
2. Apply a 1/4-inch adhesive layer using the flat side of a notched trowel.
3. Comb the adhesive with the notched side of the trowel at a 45-degree angle to create even ridges.
4. Work in small sections (2’ x 3’) to prevent the mortar from drying before tile placement.
5. Back-butter each tile (apply a thin adhesive layer to the back) for stronger adhesion.

Step 4: Cutting & Fitting Tiles

✔ Mark tiles accurately using a pencil or tile marker.
✔ Use a wet saw with a diamond blade for precise, clean cuts on polished marble.
✔ Smooth rough edges with a rubbing stone to maintain a polished look.
✔ For curved or intricate cuts, use a tile nipper or a grinding tool.
✔ Dry-fit all tiles before applying mortar to ensure a seamless pattern alignment.

Step 5: Setting the Tiles

✔ Start laying tiles from the center of the room, working outward within each grid.
✔ Place tiles with a slight twisting motion to secure a firm bond.
✔ Avoid sliding tiles into position to prevent mortar displacement.
✔ Use spacers to maintain consistent grout joints and ensure a seamless herringbone pattern.
✔ Tap each tile gently with a rubber mallet to ensure even placement.
✔ Wipe off excess mortar with a damp sponge.
✔ Allow the adhesive to cure for at least 24 hours before proceeding with grouting.

Step 6: Grouting & Finishing

✔ Remove tile spacers before applying grout.
✔ Use a high-quality, non-sanded grout to prevent scratches on the polished marble surface.
✔ Spread the grout diagonally across the tiles using a rubber float, ensuring joints are completely filled.
✔ Remove excess grout immediately using the float’s edge.
✔ Wait 15–20 minutes, then wipe off the grout haze with a damp sponge.
✔ Allow grout to cure for 72 hours before exposing the surface to heavy use.
✔ Apply a penetrating sealer after the grout has fully cured to protect the stone from stains and moisture.

Maintenance Tips

✔ Use pH-neutral stone cleaners to maintain the natural look of polished marble tiles.
✔ Avoid acidic or harsh cleaning agents that may damage the surface.
✔ Reseal the stone regularly to maintain its durability and appearance.
✔ Place felt pads under furniture to prevent scratches.

Important Notice:

Stonemarket USA is not responsible for improper installations. For best results, we strongly recommend hiring a professional tile installer and using premium-grade materials.

📞 For any questions, contact Stonemarket USA Customer Support at [your contact information].

By following these expert installation guidelines, you’ll enjoy the timeless beauty and durability of your Royal Beige Herringbone Polished Marble Mosaic Tile (11.5″ x 11.5″) for years to come. 🚀