1×6 Herringbone Dolomite Mosaic Tile

Tools & Materials Needed:

✅ Tile adhesive (thin-set mortar)
✅ Notched trowel
✅ Tile spacers
✅ Level
✅ Tile cutter or wet saw
✅ Grout
✅ Grout float
✅ Sponge & bucket of water
✅ Measuring tape
✅ Pencil & straightedge

Step-by-Step Installation Instructions

Step 1: Surface Preparation

• Ensure the installation surface is clean, dry, and level.
• For backsplash installations, remove any dust or grease.
• For floor installations, ensure the subfloor is solid and stable to prevent movement.
• If necessary, apply a waterproofing membrane for wet areas like showers.

Step 2: Planning & Layout

• Dry lay the tiles on the surface to determine the best layout and reduce unnecessary cuts.
• Use a chalk line or level to mark the starting points.
• Ensure the herringbone pattern is aligned properly for a seamless look.

Step 3: Applying the Adhesive

• Using a notched trowel, spread a thin layer of tile adhesive evenly over a small working section.
• Hold the trowel at a 45-degree angle to create grooves for better adhesion.

Step 4: Installing the Tiles

• Carefully place the mosaic sheets onto the adhesive, pressing firmly but gently.
• Use tile spacers to maintain even gaps between sheets.
• Adjust tiles before the adhesive dries to ensure straight lines and proper alignment.

Step 5: Cutting Tiles (If Needed)

• Use a wet saw or tile cutter to trim tiles at edges and corners.
• Always measure twice and cut once for accuracy.

Step 6: Allowing the Adhesive to Set

• Let the tiles set for 24 hours before applying grout.
• Avoid walking on the tiles or applying pressure during this curing time.

Step 7: Grouting the Tiles

• Choose a grout color that complements the dolomite marble.
• Using a grout float, spread the grout diagonally over the tiles, pressing it into the joints.
• Wipe off excess grout using a damp sponge, rinsing frequently.
• Allow the grout to set for 24 hours before the final cleaning.

Step 8: Sealing & Maintenance

• Dolomite is a natural stone and should be sealed to prevent stains and moisture damage.
• Apply a high-quality penetrating sealer and reapply every 6-12 months for optimal protection.
• Clean regularly using a pH-neutral stone cleaner (avoid acidic cleaners like vinegar).

Important Tips:

✔️ Always check manufacturer recommendations for adhesives and grout.
✔️ If installing in wet areas (e.g., shower walls), use a waterproof membrane.
✔️ Allow for expansion joints in larger installations.
✔️ Work in small sections to prevent the adhesive from drying too quickly.
✔️ Hire a professional if you’re unsure about any step in the process.

Need More Help? Contact Us!

For expert guidance or bulk order inquiries, feel free to reach out:
📧 Email: info@stonemarketusa.com
📞 Phone: +1 813 613 92 91